KINGPIN SUSPENSION KITS

KINGPIN Tough Tourer Suspension KIT

THIS, ALONG WITH OUR OTHER TOP KITS ARE HANDS DOWN THE MOST COMPREHENSIVE SUSPENSION/STEERING SYSTEM UPGRADES AVAILABLE FOR YOUR DEFENDER, PERENTIE, DISCOVERY 1 OR RRC AVAILABLE ON THE MARKET - PERIOD!

WHAT SEPERATES OUR KITS FROM OTHER KITS AVAILABLE?...

• ALL REMOTE RESI SHOCKS ARE DISASSEMBLED, AND TUNED TO SUIT YOUR APPLICATION AND VEHICLE WEIGHT - BY US, IN-HOUSE
• WE DONT IGNOOR BINDING DRIVE SHAFTS TO TO MASSIVLY INCREASED ARTICULATION OVER A FACTORY SETUP
• WE ALSO HAVE OPTIONS TO ADDRESS STEERING CASTER ANGLES, AND LESS THAN DESIRABLE PINION ANGLES AFTER LIFT,AND GET THEM BACK TO FACTORY SPEC. (ask us for more info)
• WE IN 90% OF CASES PROMOTE THE USE OF A LINEAR RATE COIL (IN THE CORRECT SPRING RATE!) FOR EVEN OUR OFFROAD FOCUSED KITS. IT REALLY COMES DOWN TO WHAT SORT OF TECHINCAL TRACKS YOU DRIVE, AND IF THE VEHICLE SEE'S TARMAC USE OR NOT. COMBINED WITH A SPRING RETAINER KIT IN THE REAR - WE INTRODUCE MORE ROLL STIFFNES INTO THE REAR SUSPENSION GEOMETRY. THIS GIVES A TWO-FOLD BENEFIT...ENCOURAGES THE FRONT END TO WORK (especially when you have factory front radius arms!), AND JUST AS IMPORTANT...IT EQUATES TO A MORE STABLE AND PREDICTABLE SETUP OFFROAD, (with the benifit of better road manners too!) ALL THAT BEING SAID - WE DO SOMTIMES DEEM A FLEXYCOIL TO BE THE BEST FIT FOR CERTAIN TYPES OF TERRAIN/ROADS. 

Part & customised Kits avail..as many will have already some components, or have specific goals in mind. You might even have HD parts on your rig...which we can work around etc
Due to the fact there is so many variations available for this kit…please contact via phone or your contact form, and we will be in touch! We will put together a tailored kit for you and your goals. We will put together a custom proposal and quote for you incl shipping estimate.

Price for the COMPLETE TOUGH TOURER KIT, incl:

• Superior Engineering 11.5" Stroke monotube Custom Valved to YOUR vehicle 2.0 Remote res Shocks Front & Rear

• KINGPIN Front Shock Turrets designed specifically for these shocks in height.

• KINGPIN Rear shock mounts designed to accommodate the 11.5" shock without the need for extended rear bumpstops

• KINGPIN HD Rear Spring Retainer System

• KINGPIN Front lower Spring Retainers

• KINGPIN 4140 SOLID Chromoly Track Rod

• KINGPIN 4140 SOLID Chromoly Drag Link

• 3x LEMFORDER Tie rod ends (Disco 1 will require 4 in total - +$59)

• Hel Performance Custom Brakelines - your colour choice (3 piece kit) (4 piece ABS  kit is +$80)

• td5 & Puma will require a fuel filter relocating bracket  

• Tough Dog 9-way adj Steering Dampener (This item is not ESSENTIAL to running the rest of the kit and can be removed  - minus $230)

• Tough Dog HD Adjustable Panhard Rod (This item is not ESSENTIAL to running the rest of the kit and can be removed  - minus $350
• Gwyn Lewis HD Cranked Rear Trailing arms

• SuperPro Rear Trailing arm Bushes – Chassis end

IF YOUR CHASING MORE DOWN TRAVEL FROM THIS KIT - KINGPIN +25mm front Bumpstops (If we are setting your truck up for high speed offroad use, beach-work, aggressive driver, or those not running a minimum 300mm front spring load height - can be added to the kit so we can lower your turret height by 25mm to unlock more down travel (+$155)

*PLEASE NOTE THAT WHILST YOU CAN GET AWAY WITHOUT A FRONT WIDE ANGLE SHAFT FOR A SHORT PERIOD OF TIME - WE DO RECOMEND A WIDE ANGLE SHAFT WITH THIS KIT - PLEASE ASK US FOR MORE INFO! (too much to write in here!)

*PLEASE NOTE YOU CANNOT RUN SWAYBARS WITH THIS KIT! ...YOU CAN ONLY RUN ONE OF OUR REAR OFFROAD SWAYBAR CONVERSION KITS!

 

KINGPIN Outback Tourer Suspension KIT

This kit has been put together for those who are are not particularly interested in long travel suspension systems, but rather want to set up a dedicated touring rig that will not only have the strength and reliability you desire, but also have the performance that will put a smile on your face.

Part & customised Kits avail..as many will have already some components, or have specific goals in mind

Due to the fact there is so many variations available for this kit…please contact via phone or your contact form, and we will be in touch! We will put together a tailored kit for you and your goals. We will put together a custom proposal and quote for you incl shipping estimate

Price for the COMPLETE OUTBACK TOURER KIT, incl:

• Superior Engineering 8.5" Stroke Custom Valved 2.0 Remote res Shocks Front & Rear (These are the same stroke as standard Land Rover shocks) but we set them up with our shock mounts to suit up to a 2" lift

• KINGPIN Front Shock Turrets designed specifically for these shocks in height.

• KINGPIN Rear shock mounts (pin to pin conversion - ideal for remote touring as heaven forbid you damage a shock, you can easily source any 80-100series Landcruiser front shock to get you out of trouble and on your way)

• Maxidrive Track Rod

• Maxidrive Drag Link

• 3x LEMFORDER Tie rod ends (Disco 1 will require 4 in total - +$59)

• Hel Performance Custom Brakelines - your colour choice (3 piece kit) (4 piece ABS  kit is +$70)

• td5 & Puma will require a fuel filter relocating bracket - (+ $110 extra)

• Tough Dog 9-way adj Steering Dampener (This item is not ESSENTIAL to running the rest of the kit and can be removed  -$230)

 

OTHER RECOMENDATIONS TO CONSIDER:

Supply of caster bushes with any lifted vehicle (+$260-$310)

*We can also supply Dobinson springs as part of this package - ask us about this

KINGPIN Weekend Warrior Suspension KIT

Part & customised Kits avail..as many will have already some components, or have specific goals in mind. You might even have HD parts on your rig...which we can work around etc
Due to the fact there is so many variations available for this kit…please contact via phone or your contact form, and we will be in touch! We will put together a tailored kit for you and your goals. We will put together a custom proposal and quote for you incl shipping estimate.

Price for the COMPLETE WEEKEND WARRIOR KIT, incl:

• Superior Engineering Superflex Arms
• Superior Engineering 11.5" stroke Rear and 12-13" stroke Front - monotube Custom Valved 2.0 Remote res Shocks Front & Rear (we can discuss what might be the best size up front)
• KINGPIN Front Shock Turrets designed and matched specifically for every shock size we offer. No more of this generic approach in regards to turret heights. You may be requiring you to move hoses, and in some cases header tanks or airbox’s. Ask us abut the turret heights if this is of concern.
• KINGPIN Rear shock mounts designed to accommodate the 11.5" shock without the need for extended rear bumpstops
• KINGPIN 25mm front Bumpstop spacers (If we are setting your truck up for higher speed offroad use, beach-work, aggressive driver, or those not running a minimum 300mm front spring load height -  these need to be removed from the kit in increase up travel - minus $155)
• KINGPIN HD Rear Spring Retainer System (retains top and bottom of rear coils)
• KINGPIN Front lower Spring Retainers
• KINGPIN 4340 SOLID Chromoly Track Rod
• Maxidrive Drag Link (+$30 for a KINGPIN 4340 Chromoly unit avail for those with Disco 1,  OR who are also doing the Disco1 draglink conversion on their Def/RRC - ask us about this!) Disco1 or Defenders doing Disco Drag Ling conversion will also require KINGPIN Steering Dampener Bracket +$82.50)
• 3x LEMFORDER Tie rod ends (Disco 1 will require 4 in total - +$59)
• 3 line Hel Performance Custom Brakelines -  (4 piece ABS  kits are +$70 if yours has ABS)
• td5 & Puma will require a fuel filter relocating bracket - (+ $110)
• Tough Dog 9-way adj Steering Dampener (This item is not ESSENTIAL to running the rest of the kit and can be removed  - minus $220) Will not ft with steering guards – we will need to supply a Bilstein instead
• KINGPIN Fab Solid 7075 1.5" Panhard with Superpro bush one end, and heim join the other. Serious offroad use only, not really recommended for tourers! (This item is not ESSENTIAL to running the rest of the kit and can be removed  - minus $500)
• Gwyn Lewis HD Cranked Rear Trailing arms
• SuperPro Rear Trailing arm Bushes – Chassis end

*PLEASE NOTE YOU WILL NEED A WIDE ANGLE SHAFT WITH THIS KIT - PLEASE ASK US FOR MORE INFO!

*PLEASE NOTE YOU CANNOT SWAYBARS WITH THIS KIT! YOU CAN ONLY RUN ONE OF OUR REAR OFFROAD SWAYBAR CONVERSION KITS!

*ASK US ABOUT SUITABLE SPRINGS IF YOUR AFTER SPRINGS AS WELL – WE CAN GET YOU SORTED*

*ASK US ABOUT FRONT PROPSHAFTS – IT IS RECOMMENDED WE SUPPLY A FRONT DOUBLE CARDAN FRONT SHAFT IM MAY CASES WITH THIS KIT. WE SUPPLY GWYN LEWIS SHAFTS*

*WE DO SHIP WORLD WIDE BUT NEED TO QUOTE MANUALY FOR KITS*

KINGPIN Beast Mode (Radflo) KIT

***SUIT DEFENDER D90 - D110 & D130***

Part & customised Kits avail..as many will have already some components, or have specific goals in mind. You might even have HD parts on your rig...which we can work around etc
Due to the fact there is so many variations available for this kit…please contact via phone or your contact form, and we will be in touch! We will put together a tailored kit for you and your goals. We will put together a custom proposal and quote for you incl shipping estimate.

Price for the COMPLETE BEAST MODE KIT, incl:

• Superior Engineering Superflex Arms
• CUSTOM Radlo 12" stroke Rear and 14" stroke Front - monotube Custom Valved 2.0 Remote res Shocks - with external compression adjusters
• KINGPIN Front Shock Turrets designed and matched specifically for these shocks. No more of this generic approach in regards to turret heights. You may likely be requiring you to move hoses, and in some cases header tanks or airbox’s. Ask us abut the turret height if this is of concern.
• KINGPIN Rear shock mounts designed specifically for the 12" Custom Radlfo shock without the need for extended rear bumpstops
• KINGPIN 25mm front Bumpstop spacers (If we are setting your truck up for higher speed offroad use, beach-work, aggressive driver, or those not running a minimum 300mm front spring load height -  these need to be removed from the kit in increase up travel - minus $155)
• KINGPIN HD Rear Spring Retainer System (retains top and bottom of rear coils)
• KINGPIN Front lower Spring Retainers
• KINGPIN 4340 SOLID Chromoly Track Rod
• KINGPIN 4140 SOLID chromoly Drag (Discovery 1 Unit)
• Disco 1 Pitman Arm (-$75 if you already have one)
• KINGPIN Steering Dampener Bracket to suit Radflo steering dampener
• 4x LEMFORDER Tie rod ends 
• 3 line Hel Performance Custom Brakelines -  (4 piece ABS  kits are +$70 if yours has ABS)
• td5 & Puma will require a fuel filter relocating bracket - (+ $95 )
• Radflo 2.0 rebuildable and serviceable and internally tunable steering dampener
  
• Rampt Customs Solid 7075 1.5" Panhard with Superpro bush one end, and heim join the other. Serious offroad use only, not really recommended for tourers! 
• KINGPIN/SUPERIOR Long arm kit (Superior Patrol long arms + our bracket kit etc) Advanced Fab skills req to fit these.

*ASK US ABOUT SUITABLE SPRINGS IF YOUR AFTER SPRINGS AS WELL – WE CAN GET YOU SORTED - you will need a minimum front spring free height of 455mm)***

*ASK US ABOUT FRONT PROPSHAFTS – IT IS RECOMMENDED WE SUPPLY A FRONT DOUBLE CARDAN FRONT SHAFT WITH THIS KIT. WE SUPPLY GWYN LEWIS SHAFTS*

*WE DO SHIP AUSSIE WIDE BUT NEED TO QUOTE MANUALY FOR KITS*

*vehicle pictured has not the long arm part of the kit installed*

KINGPIN Tough Tourer Suspension KIT - NITRO

PLEASE SEE OUR LISTING FOR THE REGULAR 'TOUGH TOURER' KIT....IT IS IDENTICAL IN EVERY WAY TO THIS KIT WITH EXCEPTION OF INSTEAD IF USING CUSTOM TUNED RESI SHOCKS - THIS KIT HAS LONG TRAVEL NITRO SHOCKS (SEE PIC THREE)

AUSSIE MADE SHOCKS AND SPRINGS!

SUIT DISCO 1, PERENTIE, DEFENDER (ALL), & COUNTY

• 4x DOBINSONS BIG BORE SHOCKS 0-2" LIFT
• 4x DOBINSONS SPRINGS 2" LIFT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***

 

THIS KIT WILL SUIT DISCOVER 1 & DEFENDERS

• 4x TOUGH DOG FOAM CELL SHOCKS - 41mm BORE - 0-2" LIFT
• 4x DOBINSONS SPRINGS (2" LIFT)

OPTIONS TO HAVE HD ADJUSTABLE PANHARD, AND/OR STEERING DAMPENER AS PART OF THIS KIT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***

THIS KIT WILL SUIT DISCOVER 1 & DEFENDERS

• 4x TOUGH DOG FOAM CELL ADJUSTABLE SHOCKS - 41mm BORE - 0-2" LIFT
• 4x DOBINSONS SPRINGS (2" LIFT)

OPTIONS TO HAVE HD ADJUSTABLE PANHARD, AND/OR STEERING DAMPENER AS PART OF THIS KIT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***

THIS KIT WILL SUIT DISCOVER 1 & DEFENDERS

• 4x TOUGH DOG FOAM CELL SHOCKS - 53mm BORE - 0-2" LIFT
• 4x DOBINSONS SPRINGS (2" LIFT)

OPTIONS TO HAVE HD ADJUSTABLE PANHARD, AND/OR STEERING DAMPENER AS PART OF THIS KIT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***

THIS KIT WILL SUIT DISCOVERY 2 

• 4x TOUGH DOG FOAM CELL ADJUSTABLE SHOCKS - 40mm BORE - 0-2" LIFT
• 4x DOBINSONS SPRINGS (2" LIFT)

OPTIONS TO HAVE HD ADJUSTABLE STEERING DAMPENER AS PART OF THIS KIT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***

THIS KIT WILL SUIT DISCOVERY 2 

• 4x TOUGH DOG FOAM CELL NON ADJUSTABLE SHOCKS - 45mm BORE - 0-2" LIFT
• 4x DOBINSONS SPRINGS (2" LIFT)

OPTIONS TO HAVE HD ADJUSTABLE STEERING DAMPENER AS PART OF THIS KIT

***WE WILL CONTACT YOU IN REGARDS TO SPRING SELECTION FOR YOUR VEHICLE AFTER YOU PLACE YOUR ORDER***