EXTERIOR

FRESHEN YOUR RIG UP WITH THESE HEX STYLE WINGTOP VENTS

BLAST-PRIME-COATED SATIN BLACK

SOLD AS PAIR

Stone's gullwing window creates an easy way to access the cargo area of your Defender!

TWO OPTIONS: FULLY ALUMINIUM & POLYCARBONATE

Polycarbonate is superior to glass in many ways. The composition of polycarbonate creates properties that make it hard to crack, break or chip. It is practically unbreakable—especially when compared to most glass. Even compared to safety glass, polycarbonate is 250 times more resistant to impact! This increases the safety of occupants from burglars, gun shots and hazardous outdoor weather phenomenon, and even the dreaded Yowie!

Polycarbonate windows are very hard to break, which is ideal for use in a accessory window fitted to any 4x4!!

Fits: All Land Rover Defender wagons (Hardtop Gullwings avail on special order)

Note: For Puma installation bottom two small angles have to be ground out.

CONTACT US FOR A FREIGHT QUOTE IF SHIPPING DOSN'T CALCULATE AT CHECKOUT FOR YOU! 

STOP THE MUD FLYING UP THE DOOR!

This is the FULL Front Mud Shield, Mud Flap Bracket and Mud Flap KIT.

This is a pair (kit includes right hand and left hand sides)

MOUNTING BRACKETS: These mounting brackets are to move your existing standard front mudflap forward and outwards, they will stop all the mud that gets flung up the doors and onto the door handle especially when big wheels and tyres are fitted, the mounting brackets are made out of 3mm galvanized steel and come with all bolts to fit them, they will also fit if you have sill bars, rock sliders fitted as the chassis bracket has 2 mounting positions.

MUD SHIELDS: These outrigger mud shield guards will fit all Defenders, they are to stop all the mud and road salt getting on top of the front outriggers, road salt and mud settles on top of the outrigger and causes them to rot away, even galvanized chassis do suffer after a while, they also make cleaning your Land Rover much easier as the mud can’t get into the outrigger and around the footwell. They are made from a rigid but still flexible 3mm plastic material in black, they are very easy to fit they use the 2 inner wing securing screws to secure them.

MUD FLAPS Mud Flaps also included in this kit

When fitting the mud shield kits we recommend using Moly Grease on all nuts/bolts and on all the steel and galvanized fittings that bolt to alloy as it acts as a barrier to stop corrosion.

Detailed fitting instructions are supplied with the kit

In-House Fab Land Rover Defender 4″ Stainless Steel Snorkel Kit

YOU WILL NEED ADDITIONAL SILICON JOINERS OR A FLEXI HOSE KIT TO INSTALL THIS COMPLETELY. THERE ARE TOO MANY VARIATIONS TO SUPPLY A FULL KIT
YOU WILL NEED TO FIGURE OUT WHAT PARTS YOU NEED.

These snorkels are hand made to the absolute highest quality using 316 Grade material.

We also back purge every weld to ensure its as strong as possible!

All snorkels come with our 3mm lasercut logo end cap.

As these are all fabricated In-House please allow approximately 4 weeks for production, unless Urgent Production is required (please ask us about options skip the que option)

 

STONE ACCESORIES

Create a handy small lockable storage space in the fender area of your Defender

 
Fits: Land Rover Defenders from 1983 - 2016, DRIVERS (right)  side

Please note that this sale does not include the mudflaps, you use your existing ones

Please see HERE for Plain After Market Rear Mud Flaps if you need these also. We can get genuine mudflaps in upon request.

Stainless steel Mud Flap Hangers (THE BRACKETS YOU CAN SEE STANDING BEHIND THE VEHICLE) - can be powdercoated upon request +$20 for satin black

FITS: Defender 110 wagon with Square Rear Tub and also the Stepped Tub 

Please see product pictures to see which tub you have!

This is a pair (kit includes right hand and left hand sides)

Don’t lose your rear Mudflaps again !!

This kit is to mount your existing rear mudflap to a much stronger mudflap support as the original ones tend to fall off and damage the side of your Defender, the mudflap mount is quick release so if using off road the mudflap can be removed very easily in seconds, the brackets are made out of 3mm galvanized steel and come with all bolts and fixings to fit them, the kit also incorporates a plastic mud shield that fastens to the rear tub to stop all the mud and road salt getting to where you don’t need it, they are made from a rigid but still flexible 3mm plastic material in black, the mud shield also makes cleaning your Land Rover much easier as the mud cant get into places where you don’t want it.

As you can see in the pictures there is a lot of items in this kit and you will have to cut your existing mudflaps to make them fit, it all can be done quite easily.

When fitting our mud shield kits I recommend using Moly Grease on all nuts/bolts and on all the steel and galvanized fittings that bolt to alloy as it acts like a barrier to stop corrosion..

If you are unsure if you have Square or Stepped rear tub this might help...(feel free to also just send us phots to I.D your tub)

Stepped Rear Tub is 2007 on Puma Td4 that have seats in the very back or a 110 utility that has no bulkhead behind the 2nd row of seats, the step was put in by Land Rover for rear forward facing seats.

Square Rear Tub is all 110s from the beginning of production, and up to 2007 Puma Td4s 2007 on mainly all commercial style ones, like crew cab pickups and  single cab pickups and 3 door hard top van style all have square rear tubs.

***PLEASE EMAIL US FOR A FREIGHT QUOTE IF THE WEBSITES SHIPPING CALCULATOR SEEMS ABIT STEEP, AND WE WILL RUN A MANUAL QUOTE FOR YOU ASAP***

DEFAB ENGINEERING - STAINLESS STEEL PUMA SNORKEL/RAISED INTAKE KIT 

• Australian made
• CNC bent 304 stainless steel 3.5"
• Classic plastic ram style air head
• Nylon printed bottom transition for perfect flow into DEFAB airbox.
• Designed so a cyclone head can be used in really dusty conditions.
• Blasted and powdercoated finish

CAN BE FITTED TO 300TDI WITH MODIFICATIONS, AND POSSIBLY ALSO TD5. YOU WILL NEED TO SORT/FIGURE YOUR OWN PLUMBING OUT IN THESE INSTANCES

KIT CONTENTS:

• Snorkel with wingtop entry vent plate
• Nylon transition adapter (under wing vent)
• Ram intake head
• Silicone joiner (used to plumb directly to DEFAB Sealed Airbox)
• Screws

PLEASE NOTE - FITTING THIS SNORKEL DOES NOT AUTOMATICALLY MEAN YOU ARE NOW ASSUMED TO BE SAFE TO UNDERTAKE WATER CROSSINGS!

PROPER FITTING AND COMMON SENSE REQUIRED. WITHOUT A SEALED AIRBOX, AND ALSO THEN ENSURING THAT SEALED AIRBOX AND SNORKEL SYSTEM IS ADEQUATLY/ACTUALLY SEALED AFTER FITMENT IS PARAMOUNT TO SAFE WATER CORSSINGS! 

DEFAB ENGINEERING / KINGPIN FAB HOLD NO RESPONSIBILTY FOR ENGINE WATER INGRESS AFTER FITTING THIS PRODUCT

 

 

LAND ROVER 16x8 NEG25 DYNAMIC BEADLOCKS

COMES WITH ALL HARDWARE AND VALVES

PLEASE CONTACT US FOR A SHIPPING QUOTE

FIT: DEFENDER, PERENTIE, RRC, DISCOVERY 1, COUNTY

A pair of Plain Land Rover 110/130 Rear Mud Flaps - no Logo

 

CNC MACHINED FILLER CAPS

4-RIB DESIGN ONLY IN STOCK ATM - OTHER DESIGNS WE GET IN AS NEEDED/ORDERED

These diesel tank filler caps make are a real eye-catcher!
Like all OFFROAD MONKEY products, the caps are made of black anodized CNC machined aluminium.

Choose from 3 different designs!

• suitable for TD5 and Puma

• 3 different designs

• Cap face is made from CNC billet aluminum

• lockable

• including 2 keys

• 100% MADE IN GERMANY

Perfect solution to run wiring neatly to your Land Rover Defender roof for lightbars and more!

• Laser Cut, and CNC folded
• Comes with Rivnuts + mounting fasteners
• 3 stage powdercoated
• Passenger side only fit

Tags: Land Rover Defender Roof wiring, :and Rover Defender Light Bar wiring

 

Stone's Gullwing inner organiser box creates a super easily setup organiser solution for you STONE Gullwing!

Create a kitchen or storage area for your work items in Stone's Inner Box

***Light not included***

CONTACT US FOR A FREIGHT QUOTE IF SHIPPING DOSN'T CALCULATE AT CHECKOUT FOR YOU! 

Stone's vehicle mounted drop down table creates a super easily setup/food prep surface, and perfectly supplements any Gullwing window, and gullwing window organiser inner box

PLEASE NOTE: these are now fully black powdercoated (hinges as well)

It uses struts, so it's easy to open and close. Its features include a bottle opener (which comes installed, but can be put on either side), two cup holders, a food-grade cutting board, and two locks - one for each top corner. Make life easy, fun and more organised while you dine under the stars during your next adventure.

CONTACT US FOR A FREIGHT QUOTE IF SHIPPING DOSN'T CALCULATE AT CHECKOUT FOR YOU! 

Landrover Defender (2007-2016) LWB 2.5 2.4 & 2.2DT (not 90 SWB or pre-TD5) 127L Outback Accessories Long Range Fuel Tank

**Please review specifications tab to ensure fitment compatibility**

Aussie manufactured Outback Accesories replacement long range tank suit D110 & D130 - (NOT D90)

Produced using the latest in-house (CAD/CAM) computer-controlled design and manufacturing equipment, Outback Accessories tanks are designed and built for strength, durability and complete reliability using superior 2mm aluminised steel and MIG welding.

With over two decades of experience developing tanks for use in tough terrain, Outback Accessories’ designs offer maximum ground clearance and uncompromised vehicle departure and ramp-over angles and feature strategically placed mounting points to relieve stresses caused by chassis twist when used in extreme conditions.

Outback Accessories’ long range fuel tanks are fully internally baffled to prevent fuel surge, require no exhaust modifications and retain original parts where possible.

Manufactured to the highest standards, tanks are cleaned, checked and pressure tested prior to being coated. All Outback Accessories long range tanks are covered by a comprehensive 2 year warranty.

*images are for general display purpose and actual item will vary to suit individual vehicles

*THIS IS S SPECIAL ORER/BUILD ITEW - ALLOW 6-8WEEKS FROM ORDERING*

*FITTING SERVICE AVAILABLE @ KINGPIN FAB*