ROCKSLIDERS & PROTECTION

Australia's best Defender StepSlider!

These StepSliders are also built TOUGH! ...So tough...they can easily support the whole weight of one side of the truck on them! Try doing that with mass produced imports!
Have the superior protection of our rock sliders, with the added benefit of a step or more width to help protect those doors from rocks, trees and other hazards coming from the side, well as something to help your better half get into your pride and joy.

TWO Options with he aluminum checkerplate tops...
*Raw aluminum
*Special very fine textured scratch resistant satin black coating

We coat these top plates with a special fine textured scratch resistant powder coating to the laser cut top plates. Satin black powder coat to the main slider assembly. The Aluminum is chromate dipped before undergoing zinc primer and top powdercoats to ensure superior adhesion not found in mass produced steps or sliders.

CAD DESIGNED

SliderSteps built tough like no other

• 4mm wall Aussie RHS for the main slider
• 4mm wall Aussie RHS to the step area
• 10mm thick laser cut rear brackets
• 8mm thick front brackets
• Laser cut Aluminum top plates with "KINGPIN' inlay
• Raw Aluminium or black rivets...your choice
• M12 Hi-Tensile fitting hardware
• Fitting instructions included

Most Sliders are custom made to order with a 2-25day turnaround depending on what your after.

 

Australia's most popular Defender Rockslider!

If you are on a budget or just prefer something a little more subtle, but still want that piece of mind that your truck is going to be protected...These Sliders are built TOUGH! ...So tough...they can easily support the whole weight of one side of the truck on them. Try doing that with mass produced imports! 

• Rocksliders built tough to take anything you can throw at them
• 4mm wall Aussie RHS for the main slider
• 10mm thick laser cut rear brackets
• 8mm thick front brackets
• M12 Hi-Tensile fitting hardware
• Fitting instructions included
• Most importantly your supporting local Aussie business, and not mass Chinese manufactured brit imports!

Most Sliders are custom made to order with a 2-25day turnaround depending on what your after. We will be in contact with you within 24hrs after placing an order to touch base with you

 

Australia's Premium Defender StepSlider!

Special laser cut and dimpled top plates set your truck apart from the rest!
These can be customized with any writing you like, or elect to have only dimpled holes if you prefer.
We coat these top plates with a special fine textured scratch resistant powder coating to the laser cut top plates. Satin black powder coat to the main slider assembly.

These Slider Steps are also built TOUGH! ...So tough...they can easily support the whole weight of one side of the truck on them! Try doing that with mass produced imports!
Have the superior protection of our rock sliders, with the added benefit of a step or more width to help protect those doors from rocks, trees and other hazards coming from the side, well as something to help your better half get into your pride and joy.

CAD DESIGNED

• Slider Steps build tough like no other
• 4mm wall Aussie RHS for the main slider
• 4mm wall Aussie RHS to the step area
• 10mm thick laser cut rear brackets
• 8mm thick front brackets
• Laser cut and Dimpled 2.5mm Steel top plate
• Stainless steel or black rivets...your choice
• M12 Hi-Tensile fitting hardware
• Fitting instructions included

Most Sliders are custom made to order with a 2-25day turnaround depending on what your after.

 

Fits front and Rear, Series 2 and 3, Defender, Discovery 1, Discovery 2, Range Rover Classic. (They will not fit Salisbury or Defender P38 Rear axle housings)

1 x Heavy Duty weld on replacement diff pan tacked together ready for you to fully weld them up.

This diff pan is one of the strongest weld on replacement diff pans available, the original diff pans are made from 1.5mm steel and rust away very quickly especially when they have a clamp on diff guard and the moisture and mud gets trapped between them. These heavy duty diff pans are made from 6mm mild steel and are folded to give maximum strength. Once fitted to your axles there is no need for a diff guard, they also come complete with a magnetic filler plug.

PLEASE NOTE WHEN WELDING THE DIY DIFF PAN UP, WELD THE OUTSIDE FIRST THEN WELD THE INSIDE, clean up the welds and then weld to your axle casing.

(By welding the outside first, and then the inside last....it will pull the diff guard back to shape, after this you can weld the diff pan to your axle casing.)

*WE CAN ALSO WELD THIS UP FOR YOU IF NEEDED - CONTACT US FOR PRICING*

These fit front and Rear, Series 2 and 3, Defender, Discovery 1, Discovery 2, Range Rover Classic. (They will not fit sailsbury axles),

They can also be used for many other makes and types of axles of similar size, Like Hilux and other mid size Japanese 4x4's

These guards weld onto the axle casing NOT the diff pan, they allow you to wash and clean behind them to stop the diff pan rusting, they are made out of 6mm mild steel and are folded to give maximum strength.

*Modification required to fit to a P38 Def rear diff

Australia's Premium Defender StepSlider!

Special laser cut and dimpled top plates set your truck apart from the rest!
These can be customized with any writing you like, or elect to have only dimpled holes if you prefer.
We can coat these with a special fine textured scratch resistant powder coating , or regular satin black.

These Slider Steps are also built TOUGH! ...So tough...they can easily support the whole weight of one side of the truck on them! Try doing that with mass produced imports!
Have the superior protection of our rock sliders, with the added benefit of a step or more width to help protect those doors from rocks, trees and other hazards coming from the side, well as something to help your better half get into your pride and joy.

CAD DESIGNED

• 4mm wall Aussie RHS for the main slider
• 4mm wall Aussie 32NB pipe to the step area
• 10mm thick laser cut rear brackets
• 8mm thick front brackets
• Laser cut and Dimpled 2.5mm Steel top plate
• M12 Hi-Tensile fitting hardware
• Fitting instructions included

Most Sliders are custom made to order with a 2-25day turnaround depending on what your after.

 

After a Defender Rockslider that's a little different?

If you are on a budget or just prefer something a little more subtle, but still want that piece of mind that your truck is going to be protected...These Sliders are built TOUGH! ...So tough...they can easily support the whole weight of one side of the truck on them. Try doing that with mass produced imports at nearly 3x the price!

These Rocksliders are the same as the SLIMLINE Rockslider - except they have a series of 50mm holes down the side. They also have 9 large drain holes on the bottom to easily drain any mud or dirt you manage to cake into them whilst offroading.

CAD DESIGNED

• Rocksliders built tough to take anything you can throw at them
• 4mm wall Aussie RHS for the main slider
• 10mm thick laser cut rear brackets
• 8mm thick front brackets
• M12 Hi-Tensile fitting hardware
• Fitting instructions included

Most Sliders are custom made to order with a 2-25day turnaround depending on what your after. We will be in contact with you within 24hrs after placing an order to touch base with you