Polyurethane Tie Rod End Boot kit

Tired of rubber boots splitting before the joint service life is up!??

The Polyurethane Track Rod End Boot KIT is the answer!

FITS:

• ALL Greasable Track Rod / Drag Link Ends, incl Delphi & Lemforder  (for Defender, Disco1, RRC,  Disco2 and P38),
• Swaybar links
• Defender Drop Arm Ball Joints.
  

This is a SINGLE replacement Track Rod End Boot made from Polyurethane.

A common problem with Rubber Track Rod End Boots these days is perishing/cracking, Rubber doesn’t seem to be what it used to be.
Polyurethane will not perish/crack like normal Rubber, giving a much longer service life.

These boots are Double Convoluted which allows them to move/flex more without stretching.

Fitting, you can remove and refit the coil clips by either using a small screwdriver to carefully wind the clip around the boot or using a zip tie to wind the coil clips around the boot.

Screwdriver:-
You need to carefully pick up one end of the larger coil clip using a small flathead screwdriver and then wind the clip around the original Rubber Boot to lift it out of its recess, your original coil clip can then be used to fit your new Poly Boot.
Fitment is the reverse, start by sitting one end of the coil clip into the recess and then wind it around the Poly Boot until the coil clip fits back into the recess.
Take care not to puncture the boot with the screwdriver.

Zip Tie:-
You need to carefully pick up one end of the larger coil clip using a small flathead screwdriver and then slip a small zip tie over the end of the clip, pull the zip tie to lift the clip out of its recess and wind it around and over the boot, your original coil clip can then be used to fit your new Poly Boot.
Fitment is the reverse, start by slipping the zip tie into the coil clip, sit one end of the coil clip into the recess and then pull the zip tie the opposite way to removal while winding around the boot until the clip sits back into its recess. (Pull the zip tie towards the Track Rod End body)