RUNNING MAFLESS TUNE WITH FACTORY M57 AIRBOX CUT OFF THE ROCKER COVER?

---THIS IS THE SOLUTION TO EASY PLUMBING--

• Suit M57N and M57N2.
• Suits 30D, 30SD and 35D.

-3201PA-F Nylon construction
-Factory Hardware Retained
-Factory "swirl/ separator" compatible (if fitted from factory) - see product pics
-25mm Barb Port
-Factory fit, no trimming required

BOSCH inline fuel filter for all M57 swaps

• Nice easy plumbing with 8mm barb fittings each end (much easier than an E70 unit)
• Suit M57, M57N, M57N2 engines

Bosch 16126765756

INLINE BOSCH FUEL PUMP FOR ALL M57 SWAPS

• This pump is far quieter than Pierberg pumps! (or anything else on the market)
• Easy plumbing with 8mm barb fittings

Looking to upgrade your M57 valve springs?

We have managed to source these OEM quality uprated valve springs out of Europe

STAGE 1 SPRINGS:

• Made from Oteva 70 SC PLUS (Same as Genuine BMW)
• Modulus of Shear 78500N/mm2
• Max recommended EMP 5.35bar (77PSI)
• Max recommended Boost 4.75bar (68PSI)
• +48% increase in spring rate over OEM

STAGE 2 springs avail on request - even stronger than our stage 1's! 

M57 SWAPPED AND PLAN ON HEADING OUT INTO REMOTE AUSTRALIA???

The Universal Fuel Manager Pre-Filter Kit , comes with a 30 micron element + bracket + 8mm hose and fittings, AND A SPARE FILTER!

Protecting late model common rail diesel engines against costly injector failure. It is designed specifically to cope with extreme weather conditions and poor fuel quality found here in Australia

FUEL MANAGER: HOW IT WORKS
When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel.

HIGH LEVEL PROTECTION
As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system.

• BENEFITS OF A FUEL PRE-FILTER KIT:
  Reduce wear & tear and avoid repair costs that can exceed $10,000
  95% water separation and superior particle removal
  Ability to separate emulsified water from ULSD
  Clear water drainage bowl to easily identify removed water
  Keeps critical engine components clean
  No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked

TWO KITS AVAILABLE!

• Basic kit for locking cams at TDC - Perfect for just doing Springs and Stems seals
• Master kit with Everything you need including removal of Bosch CP3 R90 & R70 HPFP

PLEASE NOTE - 50% OF YOUR HIRE PRICE (Excluding freight) WILL BE REFUNDED TO YOU UPON RETURN OF YOUR TOOLS IN UNDAMAGED CONDITION

14 DAY HIRE

SUIT M57N2 WITH PIEZO INJECTORS ONLY

PLEASE NOTE - 50% OF YOUR HIRE PRICE (Excluding freight) WILL BE REFUNDED TO YOU UPON RETURN OF YOUR TOOLS IN UNDAMAGED CONDITION

14 DAY HIRE

KIT TO CLEAN INJECT SEATS ON MOST ENGINES INCLUDING M57

PLEASE NOTE - 50% OF YOUR HIRE PRICE (Excluding freight) WILL BE REFUNDED TO YOU UPON RETURN OF YOUR TOOLS IN UNDAMAGED CONDITION

14 DAY HIRE

Super handy when doing valve springs to turn the engine....no need for an external torx socket

Also - if turning over the engine with ejectors/glow plugs in place for a compression test etc, you risk over-tightening or loosening the single us harmonic balance stretch bolts - this tool is what you need

PLEASE NOTE - 50% OF YOUR HIRE PRICE (Excluding freight) WILL BE REFUNDED TO YOU UPON RETURN OF YOUR TOOLS IN UNDAMAGED CONDITION

14 DAY HIRE

PLEASE NOTE - 50% OF YOUR HIRE PRICE (Excluding freight) WILL BE REFUNDED TO YOU UPON RETURN OF YOUR TOOLS IN UNDAMAGED CONDITION

Don't flush money down the bog with 3d printed compressors that break!

14 DAY HIRE