Land Rover Heavy-Duty Front Double Cardan Propshaft
Required: front swaybar spacers
If you retain the front swaybar, you must run either our 37mm Front Swaybar Spacer Kit (2 Position) or our 55mm Front Swaybar Spacers with this shaft. Choose the kit to suit your suspension and clearance requirements; you do not need both.
- 37mm, 2 position: lowers the front swaybar 37mm, with mounting positions that move the rear bush mount back 15mm or 30mm to help with link clearance.
- 55mm: lowers the front swaybar directly down 55mm. Our listing specifies this option for a Mega HD shaft with a 2-inch lift and shocks longer than the factory 550mm open length.
Check clearance throughout suspension travel. If you are unsure which kit suits your setup, send us your vehicle, lift and shock open length before ordering.
MEGA EXTREME Wide Angle HD | Defender & Discovery 1
Designed for Land Rover vehicles requiring a heavy-duty front propshaft, particularly those with modified suspension geometry or increased axle articulation.
These propshafts feature a heavy-duty double cardan assembly, wide-angle universal joints and a greaseable slip joint arrangement.
Key features
- 40° wide-angle double cardan end
- 30° wide-angle opposite joint
- Heavy-duty 60mm torque tube
- Greaseable 2020-series universal joints
- Rilsan-coated 18-spline slip assembly
- 110mm slip movement
- Heavy-duty round flange configuration
Vehicle compatibility
Select the appropriate variant for your Defender Puma, TD5, 300Tdi, 200Tdi or Discovery 1.
Important fitting information
These heavy-duty shafts require suitable clearance throughout the suspension's operating range. Front swaybar clearance must be checked, particularly on lifted vehicles or those fitted with extended-travel shocks.
Check flange compatibility, suspension clearance and lubrication requirements before installation.
Before you order
Confirm your vehicle and engine variant, front flange arrangement and suspension setup. If your vehicle has an engine or gearbox conversion, tell us before ordering rather than choosing by the original vehicle badge alone. We can confirm whether measurements are needed and how to take them.
Ask KINGPIN to check your propshaft application. Include your model, engine, gearbox, suspension lift and any existing driveline modifications.
Fitting hardware and tools
If you need replacement fasteners, see the propshaft nut and bolt kits and select the FRONT option for this shaft. Check what you already have and what is supplied with your order before adding extra hardware.
The Land Rover propshaft nut tool is designed for access to 9/16-inch propshaft nuts. Confirm your fastener size before ordering.
For other vehicles or rear-shaft applications, browse the full propshaft range.
